| 1 |
What is the maximum allowable distance that a load may project on the side of a vehicle, provided overall width does not exceed 2.5 metres? |
|
| 2 |
What is the maximum length that a load may project in front of a vehicle? |
|
| 3 |
The most important part of blocking when securing a load is: |
|
| 4 |
In which diagram is the load NOT blocked? |
|
| 5 |
A poorly loaded vehicle is unsafe to drive. To avoid loss of steering and loss of traction under power, you should: |
|
| 6 |
The truck shown in the diagram is braking heavily. In what direction will the unrestrained load on the truck tray move? |
|
| 7 |
The load on the vehicle shown in the diagram is resting against the headboard. This method of load restraint is known as |
|
| 8 |
A load restraint system on a vehicle should be capable of restraining what percentage of the weight of the load from shifting forwards and upwards? |
|
| 9 |
A load restraint system on a vehicle should be capable of restraining what percentage of the weight of the load from shifting sideways or rearwards? |
|
| 10 |
Which 'tie down angle' is not recommended for lashings? |
|
| 11 |
Vehicles carrying what type of loads are more likely to overturn on corners? |
|
| 12 |
When loading cardboard cartons and boxes on a vehicle, where should the heaviest items be placed? |
|
| 13 |
The vehicles shown in the diagram are loaded with logs. Which ones have correctly secured loads? |
|
| 14 |
For vehicles with a GVM over 4.5 tonnes (excluding cranes) the vehicle width, including the load, must not be greater than: |
|
| 15 |
Sheets and tarpaulins are not strong enough to hold down bulk loads unless the load is: |
|
| 16 |
Which of the diagrams shows the correct loading position to prevent twisting of the chassis frame? |
|
| 17 |
Which diagram shows the correct method for restraining a loose load? |
|
| 18 |
Which diagram shows the correct load position to ensure weight on the steer axles? |
|
| 19 |
Which diagram shows the correct dunnage position for long rigid loads such as steel pipes? |
|
| 20 |
Which of the following methods will best directly restrain a contained load? |
|
| 21 |
Which diagram shows the correct method for restraining small pipe or log loads? |
|
| 22 |
Which diagram shows the correct method for restraining large pipe loads? |
|
| 23 |
Which diagram shows the correct method for restraining divided loads? |
|
| 24 |
Which diagram shows the correct position for carrying loads with potentially dangerous projections? |
|
| 25 |
Which diagram shows the best method for securing loads and protecting lashings? |
|
| 26 |
Loaded shipping containers fitted with corner twist locks should: |
|